You may have to register before you can post: The one I had last week I had another processor to try and it was cold also. That way you will know if the board is grounding out in the case. No it will run the voodoo 3 agp because i have the same motherboard with a 1. I needed to get all those other patches installed anyways, or else I would be running into different problems now.
|Date Added:||16 March 2010|
|File Size:||34.31 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
KS75A w/ tbird Ghz
Once you get to the point where you’re passing textures via AGP you’re qgp in trouble. Looks like the board is coming out and maybe going back. I couldnt get a Tnt2 running in it cuz it wasnt powerfull enough maybe thats your problem. Anyone have any other ideas for 3dmark2k1?
k7s5a AGP slot voltage?
If you still get no post screen and the processor is cold Id have to condem either the mb or the processor. Do you get any post beeps at all?
I tried putting the new monitor on the old atp – worked fine. I pulled the PCI video card from the old computer and popped it into the new one – no video.
Results 1 to 9 of 9. Join thousands of tech enthusiasts and participate. Your name or email address: Join the community hereit only takes a minute. Sign up for freeit takes 30 seconds. Do not post advertisements, offensive material, profanity, or personal attacks.
Thanks for the help. Make sure the video card is fully seated in the slot. So I just needed to change the desktop color depth down to 16bit, then install 3dmark2k1, and then set the desktop back to 32bit.
ECS K7S5A mobo with nVidia FX 5200 slow??
And your has MB ks57a, and my card has Is this a motherboard issue, or is there some other thing I should try? Opatzg has it, [though even without the AGP chipset drivers installed you should get something on the screen].
I’ld check the processor seating and make sure it’s in place, then mmemory,reseat them as well. If you get a new mainboard.
That way you will know if the board is grounding out in the case. To start viewing messages, select the forum that you want to visit from the selection below. Reset Post Submit Post.
ECS K7S5A AGP 5x PCI AMR USB LAN 4x DDR Sound socket A Motherboard DDR
Ask a question and give support. And then I ran a 5 hour looping stress test, with absolutely no problems. Since the board has to be pulled to send back, I’ll try that first. A more ideal place to put this slot would be right at the bottom of the board, or not to have one at all and install MC’97 devices straight onto the PCB. On the sample avp received, there is no CPU Multiplier adjustments, no Vcore or Vdimm adjustments, and the FSB only goes from to and then to and back again; that’s is.
Yes, my password is: Have you installed the kw75a patch for it? Please remember to be considerate of other members.
If you’re asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the js75a.
The is esentially a Ti with DX9 support