The Virtual Agent is currently unavailable. If Automatic IP is configured, the Manual IP Address configuration settings are disabled, but the values for these settings are still displayed if they have been set. Gateways repackage the data packets and change the syntax to match that of the destination system. The Virtual Agent is currently unavailable. This information is not available if a non-HP cartridge is installed in the product. Consider having a replacement cartridge available for when the print quality becomes unacceptable.

Uploader: Kilkree
Date Added: 12 August 2014
File Size: 20.60 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 90983
Price: Free* [*Free Regsitration Required]

Select how soon the product should calibrate after you turn it on. If this screen is empty, no events have occurred on the printer.

Follow the instructions on the product control panel to complete the cleaning procedure. Up to seven IPv6 addresses can be shown on this screen, depending upon the automatic configuration of the networking firmware.

To configure network parameters on the product, use the product control panel, or the embedded Web server. Return and recycling instructions. When Show IP address is Onthe IP address will alternately appear on the control-panel display with the print-cartridge-status gauges.

Modify your browser’s settings to allow Javascript to execute.

HP Color LaserJet CP Series Printer – Product features | HP® Customer Support

How does HP install software and gather data? Sets all customized settings to the factory default values.


Approximate pages remaining Approximate percentage of cartridge life remaining for each color Part number Number of pages printed. The printer IP address is documented on a configuration page. See your browser’s documentation for specific instructions. If a job is processing, the product calibrates after the job is complete.

Select Cancel to automatically cancel the print job after a specified delay. Paper Handling Use this screen to configure the paper-handling defaults for the printer.

HP Color LaserJet CP2020 Printer Series – HP Embedded Web Server

This item is used when you are connecting the product directly to a personal computer using an Ethernet cable you might have to set this to On or Off depending on the computer being used. Provides N-up printing printing more than one page on a sheet. Long-side binding is for print jobs with pages that read by turning like the pages of a book. The top edge of the document is the shorter edge ho the paper. For the product to actually operate at high speed, it must have high speed enabled and be connected to an EHCI host controller that is also operating at high speed.

Gateways Gateways routers are used to connect networks together. Print Density Use the settings on the Print Density screen to adjust the amount toner the printer uses for images, pages, and documents.


HP Color LaserJet CP Series Printer – Specifications | HP® Customer Support

Print a configuration page by following these steps on the product control panel:. The requested number of copies appears in the Copies option.

Prints a report that shows the user name, application name, and color usage information on a job-by-job basis. See your browser’s documentation for specific instructions.

Please follow the applicable instructions below. If the product determines that a print cartridge has reached the end of its estimated life, select this setting to continue printing. The message is either reported on the control-panel display co2020 using the toner LED, if it exists. See your browser’s documentation for specific instructions. Press the Left arrow or Right arrow button to navigate through the listings.

All paper types support the smart duplexing feature, except for paper types that cannot be printed on both sides such as labels, transparencies, and envelopes and the following paper types:. System setup menu Use this menu to establish basic product prlnter.

Select Disable color to disable color printing.