Locate the IP address for the printer on the printer settings document. If you need further assistance, please contact Brother customer service: Some printers can be connected wirelessly, however, eliminating the need for a cable while also simplifying the method to connect other computers to the printer. Configure the Brother machine for a wireless network with a network cable using the Installation CD-ROM This FAQ explains how to configure your Brother machine for a wireless network using the Wireless setup wizard and a network cable temporarily. Launch an Internet browser, then type the IP address for your router.
|Date Added:||6 July 2012|
|File Size:||40.50 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Brother HLW Support
Configure the Brother machine for a wireless network with a network cable using the Installation CD-ROM This FAQ explains how to configure your Brother machine for a wireless network using the Wireless setup wizard and a network cable temporarily. Wait at least one minute so that the printer can obtain the network settings from the router. By using this application, you can easily connect your printer to your wireless network and install the network software and printer driver which you need to complete the configuration of your printer for a wireless network.
Go to the Manuals section. Press the “Go” button tjhree times to print out the printer settings again.
If not, press and hold the “Go” button for 20 seconds to enable the wireless interface. Locate the IP address for the printer on the printer settings document. Turn off the printer using the power switch on the left side of the printer.
Each wireless channel is on a different frequency. Authentication and encryption Most wireless networks use some kind of security settings. If you need further assistance, please contact Brother customer service: Open system Wireless devices are allowed access the network without any authentication. Due to these factors, wireless may not be the best method of connection for all types of documents and applications.
Wireless networks use channels. Matthew Burley has been a writer of online content since Configure the wireless settings: Check the Node Type listing.
However, in many countries the 217w of channels available are restricted.
A printer requires space, a power source and, typically, brotuer cable that has to be connected to your computer but that is rarely included. Contact Us Product Registration Visit www.
FAQs & Troubleshooting
You will be guided by the on-screen instructions until you are able to use your Brother wireless network printer. Video of the Day. Click the wierless Wireless” option at the bottom of the screen. Tip The wireless settings that you will need for your printer are the same settings rbother are used to connect any other device to your wireless network. If this listing says “Inactive,” you need to connect the Ethernet cable to a different port on the back of the router, then repeat this step.
How to Set up an Hl-2170W for Wireless
For further information, see Ethernet wireless network. You can view many of his articles on associatedcontent.
The screens may differ depending on operating system being used and your Brother machine. This section provides some of the main terms and concepts of these settings, which may be helpful when you configure the wireless network printer. Large objects and walls between grother two devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
The Brother printer uses the WEP keys as the pre-determined key. To help us improve our support, please provide your feedback below. Authentication methods The Brother printer supports the following methods: Encryption is used to secure the data that is sent over the wireless network.
Therefore care must be taken when configuring these options. Please note this form is used for feedback only.