In the Network dialog box, click the Protocols tab. Your router has a web interface, so you will login to it using your web browser. Figure 4 illustrates the hardware connections. Our software does everything that you need to forward a port. Perhaps your router’s default password is different than what we have listed here. Therefore, the basic rule does not provide the same level of security as the napt rule.

Uploader: Arashilar
Date Added: 10 October 2004
File Size: 64.93 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 30334
Price: Free* [*Free Regsitration Required]


It can also be specified as all zeros to indicate that this route should be used for all destinations for which no other route is defined this is the route that creates the default gateway.

Now that you have your router’s Internal IP Address we are ready to login to it.

Got it, continue to print. Your router has a web interface, so you will login to it using your web browser.

Page 26 ISP or the manufacturer. There are 2 additional ways that you can determine your router’s IP address: We also have the Internets ayu collection of Router Screenshots. If you are tau a range of ports separated by a hyphen then enter the lowest number of that range into the Local Port box and the highest number of that range into the Destination Port From box. The napt rule also translates the source port numbers to port numbers that are defined on the NAT Global Configuration page see r1130 It usually does not matter which browser you choose to use.


It’s possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to. ISP or the manufacturer.

You can use the network mask to distinguish which pool of This agu of opening a port is frequently called a port forwardsince you are forwarding a port from the internet to your home network. Each group of settings is called a PPP interface and is given a name, such as ppp-0, ppp-1, etc.

CTC-Union ATU-R130 User Manual

NAT Translations – Details” IP address for that computer. The installation program will prompt you when to connect the cable. You are now ready to follow one of our other guides. Select a protocol to which this rule applies, or choose ALL.

It is important to setup a static ip address in the device that you are forwarding a port to. If you did not see your router’s ip address in the list above. Leave it like this. Contact Customer Support if these suggestions do not resolve the problem.


If you are using the ATU-R as a bridge only, skip to step 7. Page of 74 Go.

Information About the CTC-Union ATU-R130 Router

In this case, you can configure the device as a DHCP relay agent. It looks like this: Open the Control Panel window, and then double-click the Network icon. Typically, this is the only interface you need to specify here. If you are only forwarding a single port number then enter that number into both the Local Port and the Destination Port From boxes. Since this firewall blocks incoming connections you may need open a ztu through it g130 certain games and applications. One Power adapter and power cord?

Display the NAT Rule — Verify that you are using Internet Explorer v5.

The system allows only one user ID and password.