Yukon 88E [EC] Engineering changes: My question is, what module should I be using and how the hell do i load them? Marvell Technology Group Ltd. Select all eth0 Link encap: In his “ifconfig -a” he shows enp2s0 as having no traffic this leading us to reasonably believe that this is the Marvell NIC.

Uploader: Tonris
Date Added: 27 May 2015
File Size: 63.28 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 40346
Price: Free* [*Free Regsitration Required]

If it is the kernel module then there is nothing more I can do apart from hunting down a later driver and compiling it if it exists.

And the problem is noticeable only if you look at the logs I mean, there is no observable loss of connection when this happens. I’ve upgraded to 9. Have you configured it in the web interface?

Does anybody know if this problem is still present in the following ubuntu releases 8. When the kernel is changed it will affect you. The machine has been running constantly for around 3 years now, without a single problem, until now.

At random, it produces the error “eth0: I’ve managed to blacklist sky2 and I’ve tried to load both sk98lin and skge and failed. I used the sk98lin driver with 9.


Driver download

We cannot assume anything else I’ve tried modprobe skge because it’s installed and I’ve tried to install sk98lin to vary degrees of failure. The time now is Read my post, the sk98lin driver IS from elrepo, which means that I’ve already done your suggested steps a few months ago.


July 19th, 3. Login using the form on the right or register an marvelll if you are new here. I’m running ubuntu server. Doing this would give you an additional data point for your diagnostics.

Marvell Technology Group Ltd. 88E PCI-E Gigabit Ethernet Controller [11ab] (rev 19)

I traced the problem to a newer kernel which had some updates in the “sky2” module, which marvelk the system to completely freeze at random. Marvell Technology Group Ltd.

Select all eth0 Link encap: You can find my announcement post here: Please login to post a reply You will need to be logged in to be able to post a reply. Can anybody help me? I have “Ethernet controller: You will need to be logged in to be able to post a reply. Stop counting me as a newbie and look for a problem in the settings of IP addresses, firewalls, etc. Join Date Jul Beans 5.


Marvell Yukon 88E PCI-E Gigabit Ethernet Controller Keygen – Download Now – video dailymotion

TCP segmentation error 88e0853 13 Sorry – forgot to comment on the versions, 4. Marvell Technology Group Ltd. The first indication was that after reboots, the ethernet marvelll on the motherboard is suddenly gone from the system lspci, etcit is as if its disabled from the bios.

Nick – the initial post by Munko is misleading MAC parity error Dec 13 After some searching around, I found out that the “sk98lin” module also worked fine with my ethernet and was a common alternative. This seem to run fine for now, but I’ll have to monitor the system over a longer period.